I hope you have a cuppa in front of you because finishing and blocking your garments is a big subject area and if you know me, you know that I am thorough and passionate about this subject! I should really change my middle name from Bella to Robust.
To my mind there are four key areas to properly finishing off a garment (this actually applies to many other projects too, not just things to wear):
- Washing and blocking your project
- Joining seams - including weaving in ends
- Adding the trims/ buttons
- Recording your process - this may seem like it isn't part of the finishing process but for me it is essential that I record all of the information on a project (tension pre and post blocking, weights of yarns used, pattern changes) before I start wearing or give the item away. It helps me to repeat patterns with ease and is a great reference back to what I have done in the past.
I am going to use the journey of this gorgeous little baby cardigan to show you how I wash, block, seam up, choose trims and record the details.

If you only need to know about one of these areas, then feel free to scroll to that point and ignore the other parts, I won't be upset, I won't even know! Otherwise, sip your tea and enjoy the nuggets that I have learned over the last few years and share with you in this blog post.
I completely understand the excitement of finishing that last stitch in something as big as a garment and feeling like "that is it, I have completed it" when the reality is that you most likely still have a way to go before you can actually put it on. At this point lots of people get despondent and either put the garment panels aside for another day or rush the process so that they can try it on.
However, I would say that the washing, blocking and finishing of the garment is the part that can make or break the final look. Washing it means that you have a clean garment that will be ready to wear when you have sewn it up, blocking it will mean that the size is even across your item and choosing the right trims can springboard a garment from looking okay to looking amazing!
What I can promise you is that putting the proper amount of time and effort into this final part of the process is far more likely to lead to a beautifully finished garment that is well constructed and looks as good as possible. Why spend upwards of 30-80 hours crocheting or knitting a garment to then rush the bit that completes it?
Also, you may be like me and have that giddy kipper moment when you try your handmade garment on for the first time and it is either something that you instantly love and wear, or it goes to the back of the wardrobe. Let's help it be something that is instantly loved and worn by taking the time to finish it off properly.
Washing and blocking
The three main blocking methods are wet, steam and spritz blocking and different yarn types suit different types of blocking.
Wet blocking (woollens and linen):
1 - For wool, linen or anything with a wool blend (personally 30%+ wool) I would wet block the item. Wet blocking is where you submerge the items in luke warm water containing a wool wash (preferably one with lanolin to recondition your wool) and leave it for twenty minutes or so. This is enough time for the water to penetrate into the yarn.
It is important that you don't agitate the yarn, so don't prod it, over handle it etc. If you do this, or if you use water that is too hot, you run the risk of felting your wool. Just leave it be in the soapy water for a while.
2 - When it has had 20 minutes, drain the water out and very gently rinse the project with lukewarm water and without agitation. The beauty of wool washes is that they aren't very soapy and so only need a quick rinse and some don't need rinsing at all.
3 - The next stage is to take out as much excess water as possible by squeezing the project. This is a gentle squeezing action, not a wringing action. When you can't get any more out, place your project onto an old towel, roll it up making sure that all of your project is on the inside of the towel roll and then stand on it. The weight of your body will help to transfer a lot of the excess moisture from your project to the absorbent towel. Take your project out of the towel and get ready to pin it out.

4 - You don't have to use blocking mats, you can pin out onto a towel on your carpet or even on your bed. I just really like using mats because it makes it portable, means that I can pin out standing up by placing the mats on my kitchen counter or dining room table and I can be really precise because the mats that I use have straight edges.
5 - If you are blocking a garment that has been created on panels that have to be finished (sewn or crocheted together) then the more precise you are with your blocking measurements, the easier the job of finishing will be. I like to start with the biggest piece (usually the back panel) and pin that out first. The next panel/s are then pinned out to the same measurements (if you scroll down to the photo in the 'Recording your projects' part of this blog it shows the measurements that I blocked a baby cardigan out to). I place pins diagonally (as you would put tent pegs in) slightly in from the edge of the project as this helps to alleviate the potential for a bevelled edge. An adult sized garment may need 100+ pins to block the panels out correctly.

Try to ensure that all of your measurements are even and that you aren't being too aggressive with your blocking. Ideally you should be pinning out to the required size - possibly a smidge larger to allow for sewing/crocheting up the seams.
If you want to see the entire wet blocking process, I have created 'Wet Blocking your Woollens: a comprehensive guide' and it is available on YouTube.
6 - When your project is still damp to touch, check that the edges aren't bevelled. As your project dries, it will contract and this can lead to bevelling. If this has happened, move the pins in a couple of mm to allow the fabric to boing back into position. You can move it with your fingers if it needs a little encouragement. It can take a good couple of days for your project to dry out completely and the pins should not be removed until the project is completely dry.
Steam blocking (acrylic, cotton and bamboo):
This method is particularly good for acrylic, cotton and bamboo yarns. Use the pinning out method given in bullet point 5 above before you steam block the project.
If you don't own a steamer, the next best thing is your steam iron. A word of caution though, do not let the iron actually touch the project as this will have the opposite effect and deaden your stitches, losing definition. Ensure that the iron is hovering over the project and press the steam button. This allows the moisture from the steam to get into the project and because you have already pinned it out into the required shape, that is the shape that you 'set'.
A good tip is to add some extra pins onto your project prior to steam blocking it so that iron is unable to actually touch the yarn.
I would tend to use metal or glass headed pins for steam blocking but you need to be careful not to touch them when you have just steamed over them as they retain the heat from the steam very well.
To steam block cotton and bamboo, you follow the above steps to pin your project out to the required size (don't add extra pins to stop the iron from touching the yarn), place a wet but not sopping wet cotton cloth (a tea towel or pillow case is perfect) on top of the pinned out project and run a hot iron over it until the top cloth is dry. This forces steam into your cotton project and sets the stitches.
Spritz blocking (silk):
Pin your project out to your desired dimensions (see bullet point 5 under 'Wet blocking'), spritz it with water to make it damp but not sopping, and leave it to dry before taking the pins out. Be warned, wet silk can smell really bad.
Here are the blocking items that I use:
Mats - you will need 4-6 for a garment (six also blocks a really big shawl).
Pins - I use 100+ for shawls and garments (Size 2 for lace - 4ply projects, Size 4 for 4ply to aran projects, Size 7 for chunky+ projects and aggressive blocking).
Wool wash - I use a wool wash bar because they are very economical, and contain lanolin which reconditions my woollens.
Joining seams
So, you have blocked your project into matching panels so that sewing/crocheting the panels together should be easy with well aligned stitches from one panel to the other. Taking time to properly block garment panels pays dividends for the final finishing off of your garment, especially if you are matching each joining stitch row for row or lace gap to lace gap.
The stitches you have used for the joining sides of your garment, play a large part in the sewing up technique that is best used. I have suggested some techniques below but suggest that you try a couple of methods on a small part of your project and see which you prefer for your final look and feel.
The following information has been distilled from Pauline Turner's book 'Finishing Techniques for Crochet' and from my own experiences and I have also provided links to YouTube videos that show these techniques being used on crocheted garments:
Crochet stitch joins:
Double crochet (sc) - has a decent amount of elasticity so is great for garments that need to have movement and give to them. Double crochet with right sides facing (wrong sides together) and crochet through both loops of both stitches. This can add quite a bit of bulk to your seam.
Slip stitch - this has a lot less give than a double crochet (sc) join, but can be a neat, less bulky way of joining panels together. I like using this for joining lace panels together. Slip stitch with wrong sides facing (right sides together).
Lace join - increases the width of the piece by adding a crocheted lace join in the middle of the two panels. There are various patterns for this joining technique and the Celtic Lace Join was the nicest one that I found.
Sewing stitch joins:
Back stitch - is best used when you want as little movement as possible in your finished piece.
Whip stitch - creates a good invisible seam with a small amount of elasticity.
Mattress stitch - similar outcome to whip stitch but neatly lines the two panels up side by side rather than pulled together by the stitches. Worked with right side facing.

You will note that I haven't yet mentioned weaving in ends. That's because I don't do this until my projects have been washed, blocked, dried and sewn together. This means that the blocked fabric is in its final state and when I weave the ends in I can hide them really well and know that the fabric is unlikely to change.
If you weave in the ends and trim them prior to blocking, then stretch the fabric through blocking, it can become uneven because of the woven stitches and/or the trimmed ends can start to poke out.
If I am being really clever, I leave a long enough tail on the last stitch and use the tail when joining the garment panels together (if the tail is going to be in the right place for sewing up). This means that you have fewer ends to weave in.
Adding buttons and trims:
Depending on the project that you are finishing you may need or want to add some finishing touches such as buttons, ribbon, tassles, pom poms or a crocheted border.
Buttons: Almost every crafter I know has a drawer full of buttons. Some bought from yarn shows and others lovingly handed down in vintage button drawers. I have a bit of both and like my yarn stash, have more than I could ever use. I rather suspect that sewing on a button is one of those things that many people wing and have never learned to do properly. I have scoured YouTube to find a short but helpful video on How to sew a button by hand that is secure and easy to use (not so tight that you can't get it through the button hole).
If you crocheted/knitted your garment with a particularly sturdy yarn, you might want to try using one of the plies to sew your button on with (so long as it doesn't break when you twang the two ends together). This can bring a level of finesse to your project, especially if you have contrast colour buttons.

As I live in the UK, I have also provided some shops that I use/admire for buttons:
Textile Garden does a lovely range of buttons, ribbons and shawl pins. Maggie can often be found at yarn shows in the UK.
Duttons for Buttons is a seller that I am yet to visit and it does exactly what it says on the tin - they sell buttons - lots of lovely buttons! Their range is huge (12,000 different buttons) across three shops in Harrogate, Ilkley and York.
Charity shops - I often find that my local charity shops have a little basket of buttons that they have collected and they are great to rummage through. I have also been known to buy a garment just for its fabulous buttons that have been swiftly taken off and stashed.
Ribbons: These can be a great addition to a cardigan as a button band or sewn into the neck nape area of a jumper - the part that you pull to take it off. This can help to strengthen specific parts of the garment and make it more durable.
Lots of ribbons are suitable and it is well worth keeping the little bits that you often get wrapped around gifts etc. It's a great way of reusing them rather sending them to landfill /energy from waste and they are free.
If you don't have any ribbons and want to find some nice ones, I can help you there. I carry a range of ribbons (herringbone, crafters, festive forest, Nordic flake and vintage) that are the right width for button bands, have really lovely patterns on and are made not 10 miles from my home in Cheshire, England.

Pom poms and tassels:
Depending on your style, you may want to add pom poms or tassels to your garments. Both are easy to do and you don't need specialist equipment. There are many How To tutorials on YouTube for pom poms and tassels.
Crocheted edges and colours:
You may get to the end of your project and find that you want to add a little bit of tszuj to your garment. I have Edie Eckman's 'Around the Corner Crochet Borders' and it is full of great border patterns that can easily be adapted to your garment.
Again there are lots of other books available, I am referencing this one because I own it and am happy to reference it.
You can also see from my baby cardigan that I have used a contrast colour for the edge that was added after blocking. I would love to say this was planned but actually I ran out of yarn. It was a happy accident though, as I really love the teal against the light blue.
Sometimes adding a contrast colour from the opposite side of the colour wheel from your main colour can really bring a garment to life. There is a bucket load of theory behind the use of colour and this article neatly sums it up if you just want the basics.
Recording your process:
An integral part of my finishing process is recording what I have done with the project, yarns used, weights used etc. I record lots of project elements from the very inception of a design/ project right to the final dimensions. This allows me to go back and fondle a yarn that I have used previously, see whether I made any changes to the pattern and look through any specific notes that I left myself.

This isn't just important to me because I design, it's also important because if I realy love a pattern I will make it again and it's good to be able to go back to my notebook and see what I changed or did first, second, third time around. On the most basic level, its really helpful to know what your tension/gauge was before blocking. As soon as you have blocked your item, that information is lost.
I am often asked about recording part of my process and thought it was high time I wrote it down for others to see. If you want to know more about how I record my projects, I have written a separate blog on that called 'How I log my designs, WIPs and FOs'.
That's all folks
Well, that was a whopper of a post wasn’t it? Hopefully you found lots of useful information, ideas and links in there.
If you want to follow me, I am most active on Instagram as knitithookit and also have a KNIT IT - HOOK IT - CRAFT IT Facebook page for the business.
I am also the host of The Crochet Circle Podcast which is available on YouTube and on and audio only at Podbean. And because I'm not busy enough, I have an Instgram account for that too - crochet_circle_podcast
Happy washing, blocking and finishing my lovelies!
Fay x
Your comment was posted successfully! Thank you!
руны значения символов
значение руны солнце
ингваз руна значение
дельта рун
значения русских рун
https://podlesnyiakarenlei.wordpress.com/2021/05/12/%d0%b7%d0%bd%d0%b0%d1%87%d0%b5%d0%bd%d0%b8%d0%b5-%d1%80%d1%83%d0%bd-%d0%b8-%d0%b8%d1%85-%d1%81%d0%be%d1%87%d0%b5%d1%82%d0%b0%d0%bd%d0%b8%d0%b5/
https://bopsneeews.blogspot.com/2021/05/blog-post_16.html
https://thenewstipa.blogspot.com/2021/05/blog-post.html
сколько рун
славянская руны значение
руны архангел
значение руны берегиня
значения рун перт
<a href=https://znacheniyerun.blogspot.com/2021/05/blog-post.html >руна ирий значение
<a href=https://thenewstipa.blogspot.com/2021/05/blog-post.html >манназ руна значение
<a href=https://znacheniyerun.blogspot.com/2021/05/blog-post.html >wunjo руна значение
руны скандинавскиеруны ромб значениеназвание рунруна здоровья значениезначение руны
краткое значение рун
руна значение
руны значение славянские
руна наутилус
перун значение руны
руна вольфсангель значение
диагностика руны значение
перт руны значение
sildenafil online free shipping https://eunicesildenafilcitrate.com/ where can you buy sildenafil
Visit Secure Drugstore >> Click Here! <<
Visit Secure Drugstore >> Click Here! <<
En ligne
en ligne sans ordonnance bon prix je https://www.isope.org/forums/topic/acheter-acide-valproique-generique-en-france-bas-de-prix/ pour des achats en toute sécurité gratuit
utilise Acheter en ligne
prix le moins cher comprime sens prescrire https://www.isope.org/forums/topic/acheter-allopurinol-belgique-sans-ordonnance-2/ sans ordonnance emplette
coûts
meilleurs prix pharmacie lafayette https://www.isope.org/forums/topic/aciclovir-gel-avis/ dose prescrire sun medicament pharmacie
Acheter
médecine bonne pharmacie depuis https://www.isope.org/forums/topic/tizanidine-achat-belgique-avis-covid-19/ meilleure pharmacie bon marche pour
Acheter
coûts
meilleur prix pharmacie distribuer la branche https://www.isope.org/forums/topic/diaminodiphenyl-sulfone-generique-en-france-bas-de-prix/ médicament pharmacie envoyer ai
Les moins chers Acheter pas cher
prix bas pharmacie bon marche sans https://www.isope.org/forums/topic/acheter-phenytoine-prix-effets-secondaires-alternatives/ interactions médicamenteuses pharmacie distribuer porte de versailles
Acheter
prix bas generique pharmacie en france https://www.isope.org/forums/topic/dinitrate-disosorbide-generique-en-europe/ aucun script nécessaire prescrire unesco medicament
Acheter
médicament bon prix pharmacie generique https://www.isope.org/forums/topic/ketoconazole-vente-libre/ générique bonne pharmacie depuis
Acheter en ligne
vid11meds
Характеристики профнастила Для производства профнастила компания ГрандСтрой использует высококачественную сталь с полимерным покрытием известных европейских, азиатских и отечественных производителей: Corus, Arcelor, Северсталь, НЛМК. Разные образы: мощь романской башни и легкость восходящих линий колокольнируб/панель
монолитный поликарбонат 2мм цена
монолитный поликарбонат 2мм цена
https://теплицы-новосибирск.рф/polikarbonat/ – купить поликарбонат 16 мм цена
Современные системы водоотвода не только весьма эстетичны, только и довольно прочны и способны воздерживаться снеговую нагрузку. Мембраны одностороннего применения можно укладывать на утеплитель всего одной определенной стороной, двухстороннего примене-ния — любой стороной. Простейший разночтение – волнистые листы из оцинкованной стали и листового алюминия. Именно подобные климатические уловия наблюдаются на большей части территории РФ. Отечественная занятие выпускает маломальски типоразмеров асбестоцементных листов: длиной от 1200 прежде 2500 мм и толщиной от 5,5 до 8,0 мм, соответственно. А вот в цене – есть: цементно-песчаная дешевле. Мягкая (гибкая) черепицаЛисты металлочерепицы изготавливаются для основе оцинкованной стали тож алюминия, методом штамповки сиречь роликовой обработки при непрерывном процессе. К тому же эта кровля имеет отличные эксплуатационные свойства, который позволяет отзываться уверенность в крыше над головой. В конструкции накладки предусмотрен также дополнительный утеплитель. Полимерное покрытие темных тонов более подвержено выцветанию для солнце. На втором месте находятся коричнево-шоколадные тона RR32 и RAL 8017, и, напоследок, третье место отдано зелёному цвету металлочерепицы RAL 6005. О значении некоторых технологических аспектов нужно сказать особо. У слоя посыпки залпом изрядно функций. Гибкая черепица на битумной основе покрывает практически любые формы с самыми замысловатыми поверхностями и сложными линиями их пересечения. Порядочно типов рядовой керамической черепицы: плоская ленточная, пазовая ленточная, пазовая штампованная, одноволновая, двухволновая, желобчатая и др. Выпускается оцинкованная сталь в основном в виде листов 1,25х2,5 м быть толщине 0,55 мм. Данная технология не только ускорила действие обустройства крыши, однако и расширила диапазон доступных фальцевой кровле форм. Возможна укладка мембран сообразно старому кровельному ковру. Теснейшую союз с природой имеет беспричинно называемая зеленая кровля. Ради устройства подобного водоотвода необходимо прежде выполнить лишь двухсторонние уклоны к линии водостока. Качество самореза – опять одно договор долговечной кровли. Гораздо более толстым слоем – 175 и 200 мкм – наносится для стальной лист новый полимер – пластизол. Диаметр желобов у различных производителей варьируется через 70 предварительно 200 мм, а диаметр водосточных труб – через 50 предварительно 160 мм. Иными словами, присутствие пожаре соседнего здания горящие головешки, упавшие для крышу вашего дома, не подожгут ее. Благодаря такому свойству, даже значительные царапины и сколы не будут заметны. Присутствие необходимости наклонять дерево его вынимают и углубляют ямку или, наоборот, подсыпают грунт. Форма плиток может толкать разной: прямоугольной, многоугольной, со сложной геометрией краев (зазубренной, волнистой и т.п.). Такое решение часто практикуют и чтобы устранения мостиков холода в зоне деревянных балок. Быть этом дозволительно вырезать куски нужной формы с учетом реального расположения конька, хребтов, ендов и карнизов. Другой подход позволили намного уменьшить важность металлической черепицы по отношению к керамическому образцу: берется металлический лист и штампуется с помощью пресс-формы, имитирующей отдельную черепичину либо целый масса черепичной кровли. В первую группу дозволено отнести липецкий, магнитогорский и череповецкий металлургические комбинаты – НЛМК, ММК и ОАО Северсталь, самая распространенная из которых – липецкая металлочерепица. Диффузионные мембраны и паропроницаемые пленки характеризуются полным отсутствием влагопоглощения и защищают тепло-изоляционный вещество через влаги, не пропуская воду в его толщу. Основанием почти мягкую черепицу служит сплошная (обычно дощатая) обрешетка. Толщина покрытия – 50 мкм. Внешне подобная черепица выглядит словно цельнометаллическая. Кровельное покрытие из гибкой черепицы отличается высокой ремонтопригодностью, причем место ремонта не довольно заметно, ведь качество материла не меняется со временем, и вновь положенные фрагменты зрительно неотличимы через побывавших в эксплуатации. Точность конструирования панелей выполнена таким образом, что если панели соединяются разом, получается реалистичная картина непрерывный обшивки. Быть подобном способе состыковки повышается срок службы кровли, поскольку места крепления не подвержены погодным воздействиям. Именно способность изрядно поспешно вянуть, а также протухать при нагреве свыше +60С делают вторично одно покрытие – пластизол (PVC) – не самым удачным, особенно для применения в южных регионах. Дело производства черепицы таков: увлажненную, очищенную через инородных включений, уплотненную глину формуют с помощью пресса, впоследствии чего день высушивают и обжигают присутствие температуре свыше 1000С. Теперь все модели снегозадержателей для крыши позволительно разделить на две основные группы:
Смотреть писька ленкино бесплатно для LENKINO. Новость порно, полнометражные порно видео, порно видео изнасилование на улице смотреть топ порно-звёзд и лучшее порно по https://lenkino.online/categories/%D0%93%D0%BB%D1%83%D0%B1%D0%BE%D0%BA%D0%B0%D1%8F+%D0%B3%D0%BB%D0%BE%D1%82%D0%BA%D0%B0/ категориям.
Однако дать воде стечь по водосточной трубе – полдела. Вместе же совокупление элементов ПВХ-системы между собой осуществляется либо с через ПВХ-клея, либо посреством резиновых уплотнителей. Она также производится из природного сырья – кварцевого песка и портландцемента. Некоторый фирмы-поставщики кровельных материалов практикуют услугу сообразно продаже уже раскроенных перед конкретную форму скатов листов металлочерепицы. Напоследок, опять одно покрытие – ПВФ2 (PVDF), для 80% состоящее из поливинилфторида и на 20% из акрила. Рекомендуется использовать присутствие монтаже сайдинга токмо оригинальные комплектующие: отливы, наличники иначе углы. Компания ГрандСтрой предлагает продукцию самых известных брендов, производителей мансардных окон. Который самое интересное: героиня нашего повествования – металлочерепица – отличается через стального профилированного оцинкованного листа очень немногим. Металлочерепица легко режется, однако быть укладке для крышах сложной конфигурации возникает град отходов (прежде 30%), если относительный оптимальном раскрое не подумать снова прежде покупки материала. Гибкая черепица – некоторый из самых эффективных звукоизоляторов на современном кровельном рынке. В общем, заслуживает самого пристального внимания потребителя. Ведь в ее смесь входит биосистема, состоящая из взаимодействующих наперсник с другом грунта и зеленых насаждений. Бытует вывод, что металлочерепица усиленно шумит во дата дождя, гремит при порывах ветра. Широкая цветовая гамма битумной черепицы гарантирует гармоничность крыши с окружающим ландшафтомподготовка столбов забораАльтернатива выбора материала ради опор забора — не широка. После род гибкой черепицы можно не бояться, коль на материя предоставляется 15-25 – летняя заклад, если неразлучно с материалом предлагаются подробные консультации, помощь в проектировании и монтаже, обучение и послепродажный сервис. Дальнейший разряд представляет собой особенный коврик, скапливающий влагу и минеральные удобрения чтобы подпитки растений. Возможно использование Ондулина и для облицовки стен. Срок здание цинковых сплавов, применяемых в фальцевой кровле, – 90 лет. Только из полимера ЭПДМ (этилен-пропилендиен-мономер). Теплоизоляция плоских кровель
сетка рабица 2м высота цена
купить поликарбонат в новосибирске цена
https://xn——btbckpcbqcwlbgylec0fxe.xn—p1ai/texnologiya-izgotovleniya-materialov-actual-i-novattro – сотовый поликарбонат actual
снегозадержатели позволяют снегу ослабевать малопомалу;Современные кровельные материалы для основе битумов носят название “направляемых”. Дозволительно заказать лист всякий длины (в пределах перед 6 м), а сообразно отдельным видам черепицы – и накануне 8 м. Гибкую черепицу свободно транспортировать, скрывать, поднимать на крышу. Для каменная крошка максимально плотно закрывала вид материала, применяется трехфракционный гранулят, сиречь, иными словами, базальтовые частицы трех разных размеров. Основное награда цокольного сайдинга Nailite от винилового сайдинга заключается в более широкой сфере применения и разнообразии моделей. Потом процедуры базальтовый гранулят не утрачивает цвет со временем и практически присутствие любых условиях эксплуатации. Поскольку черепица окрашивается в массе, ей позволительно придать практически всякий цвет. К примеру металлочерепица Takotta, полиэстер, пурал, пластизол. Исключая того, возникают механические напряжения (в частности, в местах креплений), которые тоже не способствуют долговечности кровли. Наклонные мансардные окна являются составной частью крыши, не нарушая ее изображение, их можно встраивать в любое кровельное покрытие. Мягкая черепица более долговечна, чем аналогичные по строению рулонные материалы из-за того, сколько она не образует сплошного покрытия, и деформации материала присутствие старении локализуются в каждой плитке в отдельности, сколько исключает нарушение покрытия через внутренних напряжений. Всегда следует помнить: калибр цинкового слоя имеет важное значение быть выборе металлочерепицы. Одно из главных достоинств керамической черепицы – нарядная «вид». Внешне безобжиговая черепица ничем не отличается через керамической. Следующее правило гласит – присутствие выборе металлочерепицы приходится разглядывать, дабы листы были промаркированы. Материалы